Shutdown xp just in 3seconds

Look out for a new and safe method to shut down your pc in just 3 SECONDS......

All you need to do is open task manager ( ctrl+alt+del ) in that u'll see a option of shutdown in the upper right corner,press this option.now press and hold ctrl key and then select turn off option from the shut down menu.you shud have hold the ctrl key in order to perform the desired task.
in 3-4 seconds your system will safely turn off.



NJOY and leave your comments

Read More

SPEED UP YOUR SYSTEM

I do not take any responsibility f anything happening wrong to ur system.
make backup of you regestry before manupulating it

Open up the Registry and go to :

HKEY_LOCAL_MACHINE/Software/Microsoft/Wi
ndows/Current Version/Explorer/RemoteComputer/NameSpace

Under that branch, select the key :

{D6277990-4C6A-11CF-8D87-00AA0060F5BF}

and delete it.

After this check out the browsing speed of ur pc....

Read More

TURN ON UR PC IN JUST 10 SECONDS

I do not take any responsibility f anything happening wrong to ur system.
make backup of you regestry before manupulating it

TURN ON UR PC IN JUST 10 SECONDS(may vary)
TURN ON UR PC IN JUST 10 SECONDS
so u wanna know how to turn the pc on in 10 seconds (may vary) heres what u have to do to turn ur pc on in 10 seconds

Click on the start button then -->>go to run
then type Regedit
press enter
this will open Registery Editor
now look for the key

HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Control\ContentIndex

now there find the Key Called
"Startup Delay"
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000 (75300:hexadecimal)
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer
You'll See The Result

Read More

Stop Error Messages from Displaying on startup

If you constantly see an error message that you can't get rid offor example, from a
piece of software that didn't uninstall properly and continues to give errors on
startupyou can disable it from displaying on startup. Run the Registry Editor and go to
HKEY_LOCAL MACHINE\SYSTEM\CurrentControlSet\Control\Windows. (This
key holds a variety of Windows system settings, such as the location of your system
directory.) Create a new DWORD called NoPopupsOnBoot and give it a value of 1.
Exit the Registry and reboot for the setting to take effect. To disable it, either delete
the DWORD value or give it a value of 0.

Read More

MISSING "folder option"

if u hav folder option missing in ur PC...
just try this...

Scan your System With NORTON ANTIVIRUS 2006.u'll find a virus (a forgot its name).repair it and then Open Run and then type "gpedit.msc".
Now goto User Configuration > Administrative templates > Windows Component > Windows Explorer.
Click on Windows Explorer you will find the 3rd option on the right side of screen "Removes the Folder Option menu item from the Tools menu"
Just check it, if it is not configured then change it to enable by double clicking on it and after applying again set it to not configured.

restart windows.......

Read More

Changeing the name of the Recycle Bin

To change the name of the Recycle Bin desktop icon, click Start then goto Run, write Regedit and press Enter. It opens Registry Editor. Now in Registry Editor go to:

HKEY_CLASSES_ROOT/CLSID/{645FF040-5081-1
01B-9F08-00AA002F954E}
and change the name "Recycle Bin" to whatever you want (don't type any quotes).

Read More

INCREASE INTERNET "SPEED"

Open regedit and perform following operatios

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentContro
lSet\Services\Tcpip\Parameters]
"SackOpts"=dword:00000001
"TcpWindowSize"=dword:0005ae4c
"Tcp1323Opts"=dword:00000003
"DefaultTTL"=dword:00000040
"EnablePMTUBHDetect"=dword:00000000
"EnablePMTUDiscovery"=dword:00000001
"GlobalMaxTcpWindowSize"=dword:0005ae4c

Read More

Renaming "START BUTTON"

To rename the start button, you will need a hex editor.
My preference is UltraEdit

Copy the \windows\explore.exe file to a new name (e.g. explorer_1.exe)
With the hex editor, open that file and go to offset 412b6
You will see the word start with blanks between each letter
Edit it be any 5 characters or less
Save the file
Boot to DOS
Copy the existing c:\windows\explorer.exe to explorer.org
Copy explorer_1.exe to explorer.exe
You will also need to replace the explorer.exe in the c:\windows\system32\dllcache file as well with the new one.
Note: If the partition is NTFS and you can't access the files from DOS:

Start Regedit
Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon.
Change the value of Shell from Explorer.exe to explorer_1.ex

Read More

REDUCE the wait time during "SHUTTING DOWN"

When you start to shut down Windows XP, it has to quit, or "kill," any live
applications or processes that are currently running. So close all applications first.
However, some applications and processes are always running in the background.
You can reduce the amount of time that Windows XP waits for those applications and
processes to close before Windows XP kills them

1. Open registry editor
2. Navigate to HKEY_USERS\.DEFAULT\Control Panel\Desktop. Set the
WaitToKillAppTimeout and set the value to 1000. Select the HungAppTimeout
\newline value and set it to 1000 as well.
3. Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control.
Select the WaitToKillServiceTimeout value and set it to 10000.
4. Close the Registry Editor.

Read More

Making system fast using "BIOS"

You can speed up your startup procedures by changing the BIOS with the built-in
setup utility. How you run this utility varies from PC to PC, but you typically get to it
by pressing the Delete, F1, or F10 keys during startup. You'll come to a menu with a
variety of choices. Here are the choices to make for faster system startups:
Quick Power On Self Test (POST)
When you choose this option, your system runs an abbreviated POST rather than the
normal, lengthy one.
Boot Up Floppy Seek
Disable this option. When it's enabled, your system spends a few extra seconds
looking for your floppy drivea relatively pointless procedure, especially considering
how infrequently you use your floppy drive.
Boot Delay
Some systems let you delay booting after you turn on your PC so that your hard drive
gets a chance to start spinning before bootup. Most likely, you don't need to have this
boot delay, so turn it off. If you run into problems, however, you can turn it back on

Read More

INCREASE bandwidth by "20%"

Microsoft reserves 20% of your available bandwidth for their own purposes like
Windows Updates and interrogating your PC etc. Click Start then Run and type
"gpedit.msc" without quotes. This opens the group policy editor. Then go to: Local
Computer Policy  Computer Configuration Administrative Templates Network
QOS Packet Scheduler and then to LimitReservableBandwidth. Double click on
Limit Reservable bandwidth. It will say it is not configured, but the truth is under the
'Explain' tab i.e."By default, the Packet Scheduler limits the system to 20 percent of
the bandwidth of a connection, but you can use this setting to override the default." So
the trick is to ENABLE reservable bandwidth, then set it to ZERO. This will allow the
system to reserve nothing, rather than the default 20%.It works on Win 2000 as well.

Read More

Make ADOBE READER as fast as NOTEPAD

Go to installation folder which is generally c:\program files\adobe\reader\

there u'll find a folder named "plug_ins"

open that folder and cut all the items present over there and paste it to
c:\program files\adobe\reader\ i.e outside the plug_ins folder.......

and u r done.observe the change by opening any .pdf file.....

Njoy

Read More

hide files in a JPEG

Hide Your Files In A JPEG

Well, did you know you could hide your files in a JPEG file? For this, you will only need to download WinRAR. You just need to have a little knowledge about Command Prompt and have WinRAR installed.

Ok, lets begin…

1. Gather all the files that you wish to hide in a folder anywhere in your PC (make it in C:\hidden - RECOMMENDED).
2. Now, add those files in a RAR archive (e.g. secret.rar). This file should also be in the same directory (C:\hidden).
3. Now, look for a simple JPEG picture file (e.g. logo.jpg). Copy/Paste that file also in C:\hidden.
4. Now, open Command Prompt (Go to Run and type ‘cmd‘). Make your working directory C:\hidden.
5. Now type: “COPY /b logo.jpg + secret.rar output.jpg” (without quotes) - Now, logo.jpg is the picture you want to show, secret.rar is the file to be hidden, and output.jpg is the file which contains both. :D
6. Now, after you have done this, you will see a file output.jpg in C:\hidden. Open it (double-click) and it will show the picture you wanted to show. Now try opening the same file with WinRAR, it will show the hidden archive .

Done! [:D ]
plz do reply

Read More

"ORKUT" is banned???

1. Press CTRL+ALT+DEL and go to the processes tab
2. Look for svchost.exe under the image name. There will be many but look for the ones which have your username under the username
3. Press DEL to kill these files. It will give you a warning, Press Yes
4. Repeat for more svchost.exe files with your username and repeat. Do not kill svchost.exe with system, local service or network service!
5. Now open My Computer
6. In the address bar, type C:\heap41a and press enter. It is a hidden folder, and is not visible by default.
7. Delete all the files here
8. Now go to Start --> Run and type Regedit
9. Go to the menu Edit --> Find
10. Type "heap41a" here and press enter. You will get something like this "[winlogon] C:\heap41a\svchost.exe C:\heap(some number)\std.txt"
11. Select that and Press DEL. It will ask "Are you sure you wanna delete this value", click Yes
12. Now close the registry editor.

Read More

speed up your net

make a registry file {anything.reg}



REGEDIT4

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\NetTrans\0000]
"MaxMTU"="576"
"MaxMSS"="536"



and click it..u'll observe speed increment in your intrernet

Read More

How to open Multiple Yahoo Messenger???

1. Go to start > Run > Type regedit > Press Enter

2. Click on the plus sign near the folder HKEY_CURRENT_USER

3. Click on the plus sign near the folder Software

4. Click on the plus sign near the folder Yahoo

5. Click on the plus sign near the folder Pager

6. Right Click on the folder name Test > New > DWORD Value

7. Right side you will get a file named New Value #1

8. Right Click on the file New Value #1 and Rename it as Plural and press enter

9. Double Click on the file Plural

10. You will get a windown named Edit DWORD Value

11. Type 1 inside 'Select the Value data' and press enter

12. Close the registery editor window

13. Now you can launch multiple windows and use different ID's.

Read More

Create a password reset disk

Microsoft has enhanced security features in XP including the the ability to create a floppy diskette to recover your password incase it is forgotten.

* Click Start
* Click Control Panel
* Click User Accounts
* Click on the account which you want to create a password disk
* Click Prevent a forgotten password which starts the Forgotten Password Wizard . This is found under Related Tasks
* Insert a blank, formatted disk into drive A, and click Next
* Enter the password in the Current user account password box

To use the recovery disk, at the Welcome screen

* Click the user name whose password is on the recovery disk
* Click the question mark button
* This causes the Did you forget your password message to appear.
* Click use your password reset disk
* This will start the Password Reset Wizard.

From this point, just follow the wizard's instructions and you will be able to set a new password. It is different if you are part of a domain, see next tip

Read More

Computer shuts of randomly

Q: I have a computer running Windows XP and sometimes it just shuts itself off. When I restart it the system gives me the system was shut down improperly message. Any idea on how I can stop the computer from just shutting off on it’s own?

A: Before delving into the possible hardware issues that can cause your PC to shut itself off, do as much PC maintenance as you can. Run Windows Update, defrag your PC, run Disk Cleanup, and run anti-virus and anti-spyware applications. Clean as much unnecessary information from your PC as possible and make sure that Windows is running without any problems by uninstalling rarely used and questionable software.

One of the most common causes of a computer shutting off is overheating. You should check your PC to make sure that the fans are not obstructed and that they are evacuating enough hot air from your PC case. You should check the fans on the case, the fan on your PCs power supply, and the fan on the CPU. If they are all spinning without obstruction and are clean (you may need to clean them), leave the cover of your case off for a while with the PC running to see if it continues to shut off at random. If it doesn’t shut off with the case open, you may consider adding additional fans to your case if it can accommodate them to move more air through your case when the cover is on.

If your PC continues to shut off at random, there could be problems with your motherboard or power supply. Contact the PCs manufacturer for additional help diagnosing the PC. They may have additional troubleshooting steps to walk you through that are specific to that PC, or they could have information on known problems with your PC model. If your PC needs to be diagnosed further by a professional, the Manufacturer’s technical support department may be able to refer you to a local repair technician to assist you further

Read More

INCREASE the SPEED of a DSL connection

Q: My question is, my computer was slow for quite some time in opening web pages or sites — it took a lot of time. I took DSL and I am still facing the same problem. Though the speed has become slightly better, it is still not in any way good enough as compared to other DSL computers that my friends have. I want to know if in any way, without spending money, I can increase the speed of my computer’s internet connection? I hope this is clear enough.

A: Thank you for your question. First, let’s consider some of the more basic possibilities. As you may already know, there are different speeds of DSL internet service. There are two important numbers to keep in mind here. The first is your incoming/download speed — how long it takes your computer to get data from the internet. The second is your outgoing/upload speed — how long it takes your computer to send data back to the internet. The easiest way to determine the speed at which your DSL service is supposed to run is to call your internet service provider. But sometimes, factors prevent your service from running at full speed. Try visiting the Tools section of dslreports.com to determine the speed and quality of your DSL modem’s internet connection. You may also wish to consult the instructions that came with your DSL modem for its IP address. A DSL modem’s IP address should look something like 192.168.x.x — replace the Xs with the correct numbers for your hardware. Once you find the IP address, type it into the address bar in your internet browser and press enter on your keyboard. Alternatively — depending on your configuration — you may be able to type the word gateway into the address bar instead.

Slower DSL services offer speeds like 256 kbps incoming by 256 kbps outgoing. If your service is that slow, the best solution is to upgrade to a faster service. For example, my DSL service is medium quality, functioning at a speed of 1536 kbps incoming by 480 kbps outgoing. It is worth noting that I actually pay for a few hundred more kbps of outgoing signal than I am actually using. That is either because my telephone line is of poor quality — probably the case considering the outward appearance of the wires — or I am to far away from certain equipment in my city.

Unlike cable internet, DSL requires that your DSL modem be a certain distance from a digital subscriber line access multiplexer, which is also referred to as a “home office”. If your distance from the multiplexer is greater than 1.25 miles, which could really slow your internet down. I know this from personal experience. My family and I subscribed to DSL service in the early days of broadband internet. We signed up for the service and installed all of the correct equipment and software. But it turned out that we were too far away from the multiplexer, so we were not able to establish an internet connection. We had to switch to cable internet. Consult with your internet service provider to discover your distance from the multiplexer.

Next, please think about how you are connecting your DSL modem to your computer. I recommend not connecting the modem to your computer using USB. All but the oldest of old computers will work faster on the internet if connected to the DSL modem with an ethernet cable, instead of USB. Are you connecting to your DSL modem via wireless? If so, make sure that your computer and the DSL modem are both either 802.11g or 802.11n. Additionally, please make sure that there are “filters” connected to all of your telephones. These filters should have been included with your DSL modem. Filters must be installed on all of your telephones for your DSL to work correctly.

If none of the above are helpful, consider doing a hard reset of your DSL modem. To accomplish a hard reset, find the little hidden button on your DSL modem. Get a paperclip and bend it so that you can press the hidden button with it. The required amount of time may be different on your DSL modem, but mine requires that I press the button for about 10-15 seconds before it initiates the hard reset. You may also be able to do the hard reset using your DSL modem’s IP address. Be sure to have all of your connection information available — username, password, etc. Otherwise, you will not be able to re-establish a connection to the internet. If your connection information was not included with your DSL modem, contact your internet service provider for the necessary details.

Also think about, have you done any maintenance on your computer in awhile? Believe it or not, sometimes it is a computer rather than a DSL modem that is the source of internet speed issues. Three software tools in Microsoft Windows that you should use at least once per month are: Disk cleanup, Defragmentation, and Error-checking. Disk Cleanup is located in My Computer => right-click on your hard drive => Properties. Before pressing the Disk cleanup button, you may wish to deactivate the Compress drive to save disk space option. In Disk cleanup, choose all of the options in the first tab except the one having to do with compression. When you are finished with that, go My Computer => right-click on your hard drive => Properties => Tools, and there you will find both Defragmentation and Error-checking. Be sure to choose both options in Error-checking. If you have more than one hard drive, run all three of these tools on all of the hard drives in your computer.

Good luck! I would love to receive a comment from you, below this answer, letting me know if any of this was helpfu

Read More

Configuring A Linksys Router For Secure WiFi

Q: I have Windows XP Home Edition on my desktop and my network is setup using a Linksys router with WiFi, but when I set it up I did not configure it to be secured. How can I correct this?

A: Having a secure WiFi network is a must! But without the exact model number of your Linksys hardware, it is impossible for me to give you a specific answer. See below for some general tips:

1. Visit Linksys.com. You should notice some tabs at the top of the webpage. Go Support -> Technical Support. You can the try: Ask Linksys (get an automated answer to your question based on the model number of your Linksys hardware), Live Chat (chat online with a Linksys representative), or download one of the EasyLink Home Networking Tools (programs that can help you to configure your Linksys hardware).
2. Is there a Linksys icon in the system tray (lower right where the clock is)? If so, right-click on it and see what options the Linksys software gives you. You also might want to go Start Menu -> All Programs and look for an icon having to do with your Linksys hardware.
3. Have you tried using any of the disks that came with your Linksys hardware?
4. Some Linksys hardware will allow you to configure the connection from within Internet Explorer (or other internet browser). Consult the documentation that came with your Linksys hardware for more information.

There are two popular types of wireless security, WEP and WPA.

1. The older and less secure of the two methods is WEP. Despite what the names suggest, WEP Shared is less secure than WEP Open. Variations of WEP include: WEP2, WEPplus, and Dynamic WEP.
2. The newer and more secure method of securing a WiFi network is WPA. Most hardware now supports WPA and/or WPA2, but some older hardware/software does not. I believe that WPA2 is currently the most secure option.

Good luck!

Read More

Making "WIFI" signals stronger

Q: The community where I live provides WiFi. In my home, the signal is weak and fluctuates between 2 & 3 (out of 5) signal bars. Is there a way to bridge/boost/amplify the signal so that my laptop receives a stronger more consistent signal? I have an Intel PRO/wireless 3945ABG network card.

A: I am happy to answer your question. Just be aware that the “signal bars” for WiFi connections are not necessarily the best indicators of internet connection quality, in my experience. For example, I once configured a computer for WiFi and the signal strength measured about 40%. But the internet was fast and stable on that computer. I have found that the best indicators of internet speed and stability are webpages loading and files downloading. If webpages load quickly and files download fast on your computer, it may be best not to mess with a good thing.

If you choose to proceed, you will need a wireless repeater to strengthen your WiFi connection. In order from easiest to most difficult to configure for your needs, devices that are capable of “repeating” a WiFi signal include:

1. wireless range expanders (page 7 of an About.com article called Wireless Product Equipment…)
2. wireless bridges
3. wireless access points (page 2 of Wireless Product Equipment…)
4. wireless routers (page 1 of Wireless Product Equipment…)

Keep in mind that the above list is also in order from least versatile to most versatile. For someone who has never configured a wireless network before, a wireless expander may be the best option. There is an article from gizmodo.com called 5 Ways To Peak Your WiFi Feng Shui… that does a good job of explaining your various hardware options. The article is over a year old — ancient in tech-time — but the advice is still valid and well presented. I recommend using the advice in reverse. That is, try the empty Pringles can trick and work your way up to the 27-inch wide parabolic antenna! The actual procedure that you will use to configure your wireless repeater will depend on the hardware you choose and the type of WiFi connection that your community provides. Consult with the appropriate person/people in your community to get connection details and product recommendations.

I hope this information helps!

Read More

Recovering Scratched CD's

Recovering Scratched CD's
Here's an easy home remedy, which might give you the desired results. Rub a small amount of toothpaste on the scratch and polish the CD with a soft cloth and any petroleum-based polishing solution (like clear shoe polish). Squirt a drop of Brasso and wipe it with a clean cloth.
Technology to the rescue:
There are many softwares available on the net, which enable the recovery of the CD data. BadCopy Pro is one such software, which can be used to recover destroyed data and files from a range of media.
Just a few clicks is all it requires to recover the disc from almost all kind of damage situation; be it corrupted, lost data, unreadable or defective.
DiskDoctors is another popular company, which offers both software and solutions to recover data from a scratched CDs and DVDs

General Tips:
* Always wipe the CD from the center outward with straight spoke-like strokes. Wiping CDs in circles will create more scratches.
* Do not scratch the graphics layer as you cannot repair the disc.
HINT: Hold the disc up to a light with the graphics layer facing the light source. If you can see light thru the scratches at any point then the disc may be irreparable and or exhibit loading or playing errors.
* Clean your Disc players lens regularly with a suitable product to ensure optimal viewing pleasure.
* Make sure to use a soft, lint-free cloth to clean both sides of the disc. Wipe in a straight line from the centre of the disc to the outer edge.
* If wiping with a cloth does not remove a fingerprint or smudge, use a specialized DVD disc polishing spray to clean the disc.

Read More

"INCREASE" harddisk speed

To speed up your hard disk speed we need to configure a special buffer in the computer's memory in order to enable it to better deal with interrupts made from the disk.

This tip is only recommended if you have 256MB RAM or higher.

Follow these steps:

* Run SYSEDIT.EXE from the Run command.
* Expand the system.ini file window.
* Scroll down almost to the end of the file till you find a line called [386enh].
* Press Enter to make one blank line, and in that line type

Irq14=4096

Note: This line IS CASE SENSITIVE!!!

* Click on the File menu, then choose Save.
* Close SYSEDIT and reboot your computer.
* Done. Speed improvement will be noticed after the computer reboots.


The most speed improvement is visible with IDE drives, however there are reports that this tweak also does good for SCSI disks.

Read More

Surf blocked sites using"SOFTWARE"

ULTRASURF

"Browse the world without any limit for free with safety" New revolution in the field of proxy, simple to use and faster. No more slot limitations, time limits, geographical limits, bandwidth problems in same old proxies. Switch to UltraSurf 8.9



UltraSurf is the flagship software product from UltraReach Internet Corp. for Internet anti-censorship. It enables users inside countries with heavy Internet censorship to visit any public web sites in the world safely and freely.

As the safety and convenience of the users is our first priority, the most prominent features of UltraSurf 8 are that it has implemented a complex proxy with complete transparency and a high level of encryption on the Microsoft Internet Explorer (IE) platform. UltraSurf 8 enables users to browse any website freely just the same as using the regular IE browser while it automatically searches the highest speed proxy servers in the background.

UltraSurf 8 implements almost all browser functions based on HTTP and user needs, such as browsing websites, login and posting on web forums, using Web mail, uploading and downloading data files, real time audio, video and other multimedia programs, etc. Please refer to the “UltraSurf 8 Users Guide” for detailed information.

UltraSurf 8 is a green software, which means no installation process is needed nor system setting is required to change when using the software. It is simply an executable on Windows platform.

Download the UltraSurf 8 client software now

http://www.wujie.net/downloads/ultrasurf/u.zip

Download the UltraSurf 6 User Guide in English at:
http://www.wujie.net/downloads/ultrasurf/UltraSurf6_userGuide_en.zip


Note: The English version is for ultrasurf 6. You may use it as the reference for current version ultrasurf 8.



FREEGATE

FreeGate is a software utility that enables Chinese and Iranian surfers to view websites banned by their government (see Internet censorship in the People's Republic of China). Developer Dynamic Internet Technology (DIT) estimates Freegate has 200,000 users.The software takes advantage of a range of proxy servers assigned to changeable internet addresses, which allows users in China, Iran and Myanmar access to sites banned by the Chinese, Iranian and Myanmar governments. The program exploits open proxies, which allow users to penetrate firewalls used to block web sites

Download -

http://www.download.com/Freegate/3000-2085_4-10415391.html

Read More

Convert a FAT partition to NTFS

To convert a FAT partition to NTFS, perform the following steps.

Click Start, click Programs, and then click Command Prompt.

In Windows XP, click Start, and then click Run.


At the command prompt, type CONVERT [driveletter]: /FS:NTFS.

Convert.exe will attempt to convert the partition to NTFS.


NOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency repair disk (ERD).


Convert.exe will attempt to convert the partition to NTFS.

Read More

Remove shortcut icons from desktop

Remove shortcut arrow from desktop icons

Here's how you can remove those shortcut arrows from your desktop icons in Windows XP.

1. Start regedit.
2. Navigate to HKEY_CLASSES_ROOTlnkfile
3. Delete the IsShortcut registry value.

You may need to restart Windows XP.

Read More

How to HIde your drives

If u r having any important docs and or some other type of data u r afraid abt it . dont wory windows XP provides (not officialy ) a utility by which u can hide urs one or more drives .

1. Go to Start > run > type "diskpart".
a dos window will appear with following di$$$$$$ion.
DISKPART>

2. then type "list volume"

this will look like it

Volume### Ltr Label Fs Type Size Status Info
-------------- ---- ------ --- ----- ---- ------- -----

Volume 0 F DC-ROM
Volume 1 C NTFS Partition 7000MB Healthy
Volume 2 D soft NTFS Partition 8000MB Healthy
Volume 3 E ---- NTFS Partition 8000MB Healthy


3.if u wanna hide drive E then type "select volume 3"

then a message will appear in same winwods { Volume 3 is the selected volume}

4.now type " remove letter E"
now a message will come { Diskpart Removed the Drive letter }
sometime it requires the reboot the computer .

Diskpart will remove the letter .Windows XP is not having capabilty to identify the unkown volume.

Don't afraid ur Data will ramin same .
to Come backe the Drive repeat the process . but in 4th step which is shown in this post replace " remove" to "assign"
i mean type " assign letter E"

Its all

Read More

Make xp "GENUINE" in 1 second

JUST COPY THE FOLLOWING CODE IN A NOTEPAD AND SAVE IT AS"GENUINE.REG"
AND RUN THAT REG FILE!

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WPAEvents]
"OOBETimer"=hex:ff,d5,71,d6,8b,6a,8d,6f,d5,33,93,fd
"LastWPAEventLogged"=hex:d5,07,05,00,06,00,07,00,0f,00,38,00,24,00,fd,02

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"CurrentBuild"="1.511.1 () (Obsolete data - do not use)"
"InstallDate"=dword:427cdd95
"ProductId"="69831-640-1780577-45389"
"DigitalProductId"=hex:a4,00,00,00,03,00,00,00,36,39,38,33,31,2d,36,34,30,2d,\
31,37,38,30,35,37,37,2d,34,35,33,38,39,00,5a,00,00,00,41,32,32,2d,30,30,30,\
30,31,00,00,00,00,00,00,00,00,0d,04,89,b2,15,1b,c4,ee,62,4f,e6,64,6f,01,00,\
00,00,00,00,27,ed,85,43,a2,20,01,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,31,34,35,30,34,00,00,00,00,00,00,00,ce,0e,\
00,00,12,42,15,a0,00,08,00,00,87,01,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,94,a2,b3,ac
"LicenseInfo"=hex:9e,bf,09,d0,3a,76,a5,27,bb,f2,da,88,58,ce,58,e9,05,6b,0b,82,\
c3,74,ab,42,0d,fb,ee,c3,ea,57,d0,9d,67,a5,3d,6e,42,0d,60,c0,1a,70,24,46,16,\
0a,0a,ce,0d,b8,27,4a,46,53,f3,17

Its All.

IT IS 100% TEATED AND WILL WORK SURE!
By making your XP genuine,u can now install softwares on ur pc
such as Windows Media Player 11 , Internet Explorer 7 , etc.

Read More

LOck hide & protuct your folders

trick to lock folder
using this trick not only for locking folder but also hide it....

copy following script:-

cls
@ECHO OFF
title Folder Locker
if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST Locker goto MDLOCKER
:CONFIRM
echo Are you sure u want to Lock the folder(Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren Locker "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
echo Folder locked
goto End
:UNLOCK
echo Enter password to Unlock folder
set/p "pass=>"
if NOT %pass%==mayank goto FAIL
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" Locker
echo Folder Unlocked successfully
goto End
:FAIL
echo Invalid password
goto end
:MDLOCKER
md Locker
echo Locker created successfully
goto End
:End


now go for following few steps
1.paste above text into notepad.
2.save that file by extension .bat ( name is ur choice)
3.now on ur screen there is a bat file appear.
4.double click on that file.
5.a new folder named locker will appear on the screen.
6.keep the files and folders u want to lock in that locker folder.
7.now again double click on that batch file to lock that locker folder.
8.after locking that folder it will become hidden.
9.to open that folder double click on that bat file
10.type ur password & open that folder.
11.password for the locked folder is mayank

plz reply ur experience........

Read More

To Enable Task Manager, Registry Editing, Folder options

To Enable Task Manager

Click Start then Run.
Enter gpedit.msc at the command line and click OK. This will open the Group Policy settings window
Select User Configuration | Administrative Templates | System | Ctrl+Alt+Delete Options | Remove Task Manager.
Double-click the Remove Task Manager option from the Group Policy menu. You can then disable, enable, or set the policy to Not Configured. Remember: Since the policy in question is called Remove Task Manager, by disabling the policy, you are actually enabling the Task Manager.

To Enable Registry Editing
Click Start, Run and type GPEDIT.MSC to launch the Group Policy Editor, Now goto User Configuration \ Administrative Templates \ System and set the policy (Prevent access to registry editiing tool) to Not Configured

To enable Folder options
Go to Run –>gpedit.msc
User Configuration –> Administrative Templates –> Windows Components –> Windows Explorer
Enable and then Disable “Removes Folder Options menu from Tools menu

Read More

Earning backlinks, improve your page rank

First of all what’s a backlink ?

A backlink is an incoming link to a website, is any link received by a web page, directory, website, blogs etc etc… from another website. The Backlinks are also known as incoming links, inbound links, inlinks, and inward links.
What’s Page Rank ?
Simply a PageRank (PR) means the popularity of a web page used by Google Search Engine for classifying its search results. It has an important while selling links on your website, people always ask for your PR.. The problem is how to get a good one..
The best way is to gain backlinks.. But how ?
We can see lots of people sponsoring forums/blogs/websites themes and putting a link of their website in the theme (in the footer usually) the problem with that is almost all webmasters that use those themes remove all the links from the theme, even the copyrights of the designer, so it still a weak technique to earn backlinks while you spend lots of money to sponsor them.
I’ve got here 5 great techniques to gain backlinks.
1. Submitting your blog in web directories and social networks: When you submit your link in social networks they help you to get indexed in google quickly and improve your PR since every submission is a backlink. About the directories, you need to look for good ones, for directory sites that are indexed deep (with too many backlinks translated to a good PR) so it helps your PR to grow. I’d recommend submitterbot.com to do such a technique.
2. Commenting on Dofollow blogs & forums: Dofollow blogs & forums are sites that give you a backlink just for commenting on their articles and posts. (Iearn-Money is a dofollow blog by the way).
3. Buying forums users signature: Since you sponsor themes with high amounts of money, and buying links with high prices, why don’t you just buy users signatures, for example $5 a month and a minimum of 1000 posts, you earn 1k backlinks which is excelent..
4. Exchanging links with other bloggers: You can exchange links with other webmasters, they put your link on their blog and you do the same.. Better exchange links with blogs/websites that have a good PR so it help you to improve yours.
5. Buying text links or banners: Advertising on other blogs/websites is a good way to improve your PR though.. Just find a cheap advertising packages and feel free to advertise without any worries.
I still have a good technique to build strong Inbound links, but I’ll post it in a separated article, because it needs more explanation.
Note: There are nofollow and dofollow backlinks, the ones which help you to improve your PR are the dofollow ones.
To check your Backlinks, I recommend this tool: backlinkwatch.com
And good luck to everyone. Feel free to comment if you have more techniques to gain more backlinks.

Read More

Recover the lost admin password

Slightly more work needed if you lose or forget the Windows XP administrator password.
1.First reboot Windows XP in safe mode by re-starting the computer and pressing F8 repeated as the computer starts up.
2.Then (in safe mode) click Start and then click Run. In the open box type “control userpasswords2″ without the quotes - I have just used quotes to differentiate what you have to type.
3.You will now have access to all the user accounts, including the administrators account and will be able to reset the lost password.
4.Just click the administrators user account, and then click Reset Password.
5.You will need to add a new password in the New password and the Confirm new password boxes, and confirm by clicking OK.
All done, you have recovered the lost adminitrators password!
if u like this trick leave ur comment

Read More

Recover the lost admin password

Slightly more work needed if you lose or forget the Windows XP administrator password.
1.First reboot Windows XP in safe mode by re-starting the computer and pressing F8 repeated as the computer starts up.
2.Then (in safe mode) click Start and then click Run. In the open box type “control userpasswords2″ without the quotes - I have just used quotes to differentiate what you have to type.
3.You will now have access to all the user accounts, including the administrators account and will be able to reset the lost password.
4.Just click the administrators user account, and then click Reset Password.
5.You will need to add a new password in the New password and the Confirm new password boxes, and confirm by clicking OK.
All done, you have recovered the lost adminitrators password!
if u like this trick leave ur comment

Read More

Common command console utilities

WindowsXP comes with quite a few console utilities you can easily run from the command line:
Computer Management - compmgmt.msc
Disk Managment - diskmgmt.msc
Device Manager - devmgmt.msc
Disk Defrag - dfrg.msc
Event Viewer - eventvwr.msc
Shared Folders - fsmgmt.msc
Group Policies - gpedit.msc
Local Users and Groups - lusrmgr.msc
Performance Monitor - perfmon.msc
Resultant Set of Policies - rsop.msc
Local Security Settings - secpol.msc
Services - services.msc
Component Services - comexp.msc

Read More

Open Zip Files even if Winzip not installed

Open Zip files in Pc if u dont have winzip software installed..


In Start>Run, type the following and press enter.

regsvr32 /u zipfldr.dll

now u can open zip files easily..

Read More

Picture on background of pendrive

1 - open the Windows Notepad copy and paste the text below:




[ExtShellFolderViews]
{BE098140-A513-11D0-A3A4-00C04FD706EC}={BE098140-A513-11D0-A3A4-00C04FD706EC}

[{BE098140-A513-11D0-A3A4-00C04FD706EC}]
Attributes=156
IconArea_Image=Diego.jpg
IconArea_Text=0x00ffffff
IconArea_Textbackground=0x00000000
[.ShellClassInfo]
ConfirmFileOp=110
IconFile=%SystemRoot%\system32\SHELL32.dll
IconIndex=160






2 where is "Diego.jpg" you put the name of your image and the extension "example.. Jpg. Bmp. Gif,


3 Save the aquivo in pendriver with the name Desktop.ini (obs: the photo should is in the pendriver , then you can leave the file created "desktop.ini and photo" hidden ") 1 - open the Windows Notepad copy and paste the text below:




[ExtShellFolderViews]
{BE098140-A513-11D0-A3A4-00C04FD706EC}={BE098140-A513-11D0-A3A4-00C04FD706EC}

[{BE098140-A513-11D0-A3A4-00C04FD706EC}]
Attributes=156
IconArea_Image=Diego.jpg
IconArea_Text=0x00ffffff
IconArea_Textbackground=0x00000000
[.ShellClassInfo]
ConfirmFileOp=110
IconFile=%SystemRoot%\system32\SHELL32.dll
IconIndex=160






2 where is "Diego.jpg" you put the name of your image and the extension "example.. Jpg. Bmp. Gif,


3 Save the aquivo in pendriver with the name Desktop.ini (obs: the photo should is in the pendriver , then you can leave the file created "desktop.ini and photo" hidden ")

Read More

Increase options in add or remove programs

Not a fan of MSN Messenger? don't want Windows Media Player on your system? Fair enough, but if you go to Add/Remove Programs in the Control Panel, by default none of Windows XP's 'built in' programs are visible. it's fairly easy to change, though... just open the file X:\Windows\inf\sysoc.inf (where X: is the drive letter where Windows XP is installed) in Notepad. You should see a section of the file something like this:

[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
IEAccess=ocgen.dll,OcEntry,ieaccess.inf,,7
This is a list of all components installed at the moment. I've taken the example of MSN Messenger - the program entry called 'msmsgs', third-last line. You can see the word 'hide' highlighted - this is the string which tells Windows not to display the component in the Add/Remove Programs list. Fix this up by simply deleting the word 'hide' like so:

msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7

To this:

msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,,7

Now, after restarting, you should be able to see MSN Messenger in the Add/Remove Programs list. If you want to be able to quickly view and remove all components, simply open the sysoc.inf file and do a global find and replace for the word ",hide" and replace it with a single comma ",".

Read More

MOZILLA FIREFOX & GMAIL shortcuts

Ctrl + Tab or Ctrl + PageDown: Cycle through tabs.
Ctrl + Shift + Tab or Ctrl + PageUp: Cycle through tabs in reverse.
Ctrl + (1-9): Switch to tab corresponding to number.
Ctrl + N: New window.
Ctrl + T: New tab.
Ctrl + L or Alt + D or F6: Switch focus to location bar.
Ctrl + Enter: Open location in new tab.
Shift + Enter: Open location in new window.
Ctrl + K or Ctrl + E: Switch focus to search bar.
Ctrl + O: Open a local file.
Ctrl + W: Close tab, or window if there's only one tab open.
Ctrl + Shift + W: Close window.
Ctrl + S: Save page as a local file.
Ctrl + P: Print page.
Ctrl + F or F3: Open find toolbar.
Ctrl + G or F3: Find next...
Ctrl + Shift + G or Shift + F3: Find previous...
Ctrl + B or Ctrl + I: Open Bookmarks sidebar.
Ctrl + H: Open History sidebar.
Escape: Stop loading page.
Ctrl + R or F5: Reload current page.
Ctrl + Shift + R or Ctrl + F5: Reload current page; bypass cache.
Ctrl + U: View page source.
Ctrl + D: Bookmark current page.
Ctrl + NumpadPlus or Ctrl + Equals (+/=): Increase text size.
Ctrl + NumpadMinus or Ctrl + Minus: Decrease text size.
Ctrl + Numpad0 or Ctrl + 0: Set text size to default.
Alt + Left or Backspace: Back.
Alt + Right or Shift + Backspace: Forward.
Alt + Home: Open home page.
Ctrl + M: Open new message in integrated mail client.
Ctrl + J: Open Downloads dialog.
F6: Switch to next frame. You must have selected something on the page already, e.g. by use of Tab.
Shift + F6: Switch to previous frame.
Apostrophe ('): Find link as you type.
Slash (/): Find text as you type.

GMail

Note: Must have "keyboard shortcuts" on in settings.
C: Compose new message.
Shift + C: Open new window to compose new message.
Slash (/): Switch focus to search box.
K: Switch focus to the next most recent email. Enter or "O" opens focused email.
J: Switch focus to the next oldest email.
N: Switch focus to the next message in the "conversation." Enter or "O" expands/collapses messages.
P: Switch focus to the previous message.
U: Takes you back to the inbox and checks for new mail.
Y: Various actions depending on current view:
Has no effect in "Sent" and "All Mail" views.
Inbox: Archive email or message.
Starred: Unstar email or message.
Spam: Unmark as spam and move back to "Inbox."
Trash: Move back to "Inbox."
Any label: Remove the label.
X: "Check" an email. Various actions can be performed against all checked emails.
S: "Star" an email. Identical to the more familiar term, "flagging."
R: Reply to the email.
A: Reply to all recipients of the email.
F: Forward an email.
Shift + R: Reply to the email in a new window.
Shift + A: Reply to all recipients of the email in a new window.
Shift + F: Forward an email in a new window.
Shift + 1 (!): Mark an email as spam and remove it from the inbox.
G then I: Switch to "Inbox" view.
G then S: Switch to "Starred" view.
G then A: Switch to "All Mail" view.
G then C: Switch to "Contacts" view.
G then S: Switch to "Drafts" view.

Read More

All apple "IPHONE" tricks & hacks

*3001#12345#* and tap Call: Field Mode (iPhone network and cellular information)
*#06# : IMEI number.
*777# and tap Call: Pre-paid account balance.
*225# and tap Call: Post-paid account balance.
*646# and tap Call: Post-paid minute balance.
*#21# and tap Call: Call feature settings (enabled/disabled) for voice, data, fax, SMS, sync, async, packet access, call forwarding.
*#30# and tap Call: Caller-ID display check (enabled/disabled)
*#76# and tap Call: Connected call display check (enabled/disabled)
*#43# and tap Call: Determine if call waiting is enabled.
*#61# and tap Call: Call forwarding number with service (no-answer)
*#62# and tap Call: Call forwarding number without service (no-ring)
*#67# and tap Call: Call forwarding number when busy
*#33# and tap Call: Check outgoing services for call-barring (enabled/disabled)
*************************************
After playing with your new Apple iPhone awhile, you are certain to discover tips and tricks that are very useful. For those who are not fortunate enough to own your own iPhone, after reading about some of these iPhone tips and tricks, you will probably run out and purchase one today. Here are some of the iPhones tips and tricks.
1. This tip will save you a little bit of your valuable time. When you are connected, tapping once at the very top section of the iPhone’s touch screen will bring you back to the window. It isn’t necessary for you to scroll to get back there.
2. By putting the RSS address into the iPhones reader you won’t have to post the compete address of the sites you’ve bookmarked as your favorites. Doing it this way saves your bookmarks. In that way it can lead you to the address. As an added benefit, it also saves you from having to download the entire webpage.
3. By putting your iPhone font setting to the smallest size possible, it will allow you to be able to read more of what is written in the net window. The advantage is by clicking on the link, you can expand that and the link will make it easier for you to click as well.
4. If you are anything like me, then there are certain words you often misspell? The iPhone has a great feature that will help you remedy this. If you’ve misspelled the word, you can let your iPhone flag it. By canceling this three times, the word will be automatically indexed in the iPhone’s dictionary. The next time you misspell that word, walla! Your iPhone will correct the misspelled word automatically.
5. If you are writing a letter or composing an email and the magnifying glass tool isn’t very helpful because it is too small to be of any use, try tapping it once and then hold. When you do this, the magnifying glass icon will show you how far you can zoom in order for you to get a better view of the letter or email you are writing. As an added benefit, you will find it also makes editing quite easy.
6. If you want to restart your iPhone, press the right button for about 6 seconds. If you want to turn it back on, push the button located at the very top.
7. Do you drag the icons around on your home screen in order to organize them? An easier way to tidy your iPhone up is, go to iPod, click on More, then click on Edit

Read More

How to clean motherbord to save...........

Motherboard is the main part of your computer that contains all hardware components. Your computer motherboard could fry, if you do not keep it clean on periodically basis. Dust is the main cause to heat up your system and heat link to hardware failure. You can save your computer maintenance cost if you clean your computer on the regular basis. This will improve the cooling and performance of the motherboard components.

*

To clean your motherboard first unplugs your system power from the electrical outlet.
*

Using the screwdriver remove the side covers of your computer case and put them to one side.
*

Check all data and power cables connections. Inspect all motherboard PCI and AGP slots.
*

Remove all add-on card of your motherboard for example RAM, modem, VGA, sound card and LAN card.
*

Now blow the air around all the motherboard sides and keeping away your blower nozzle 4 to 5 inches away from main board components. You can use vacuum cleaner also for this purpose but compressed air is the better solution to clean a system.
*

At the end assemble back all cards, cables and side covers of your system.
*

I recommend you doing this after every three months if you want to save your system life

Read More

Inrease your ram speed so system speed...........

1). Start any application, say Word. Open some large documents.

2). Press CTRL+SHIFT+ESC to open Windows Task Manager and click Processes tab and sort the list in descending order on Mem Usage. You will notice that WINWORD.EXE will be somewhere at the top, using multiple MBs of memory.

3). Now switch to Word and simply minimize it. (Don't use the Minimize All Windows option of the task bar).

4). Now go back to the Windows Task Manager and see where WINWORD.EXE is listed. Most probably you will not find it at the top. You will typically have to scroll to the bottom of the list to find Word. Now check out the amount of RAM it is using. Surprised? The memory utilization has reduced by a huge amount.

5). Minimize each application that you are currently not working on by clicking on the Minimize button & you can increase the amount of available RAM by a substantial margin. Depending upon the number and type of applications you use together, the difference can be as much as 50 percent of extra RAM.

In any multitasking system, minimizing an application means that it won't be utilized by the user right now. Therefore, the OS automatically makes the application use virtual memory & keeps bare minimum amounts of the code in physical RAM.

Read More

MAKE MP3 FILES WITH OUT LOOSING QUALITY..............

If you don't already have a copy of MusicMatch Jukebox, download one from musicmatch.com. The "Plus" version has more features and burns CDs faster, but the free version works just fine for converting files


1. Install music match box and then restart your computer if it asks
2. open music matchbox and click file convert files
3. in the bottom right hand corner called 'destination type' change it to mp3 pro.
4.you can edit the bitrate but the higher the bitrate the bigger the size
5. choose the songs you want to convert and click start

**if you want to try something different repeat step one and 2 and instead of making the destintion type mp3 pro make it 'mp3pro vbr'

again the lower the setting the smaller the size

Read More

HOW TO UNINSTALL GROVE MONITOR.EXE

GrooveMonitor is a service utility that tracks groove behavour and creates reports for error reporting to MS (what else does it report?). It loads on startup. It gets installed when you install Office 2007. However it doesn't get uninstalled when you uninstall Office 2007. GrooveMonitor starts upon Windows startup (via registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run).
To remove GrooveMonitor from your machine you have to go to Control Panel and then select Add/Remove programs. GrooveMonitor is one of the displayed applications. Uninstall it from there. That should do it for any normal windows program. Not surprisingly Microsoft himself often violates this basic principle (which surprisingly would give you more control over their crappy [pardon my French] software), and GrooveMonitor will still load on startup.
You can however use msconfig to prevent it from coming up on Windows startup.
1. Go to Start menu and click Run
2. Type msconfig and press Enter.
3. Go to Startup tab and then uncheck any reference to "groovemonitor"
4. Reboot
Note: Some malware may also camouflage themselves as GrooveMonitor.exe, particularly if they are located in c:\windows or c:\windows\system32 folder.
GrooveMonitor is currently owned by Microsoft Corporation.

Read More

Multiple orkut in FIREFOX

Login with multiple ids at the same time into orkut , gmail , yahoo
To perform this trick u need firefox mozilla browser

======== Trick to Multilogin in firefox ============

Step 1:
open system properties(by right clicking my computer), choose tab advanced, click to environment variables button. in system variables section, click new. type this information to each textbox.

variable name: moz_no_remote(should be all small letter)

variable value: 1

press ok to close all windows.

step 2:
open firefox icon's properties(from desktop and quick launch). add extension -p to command line(like "c:\program files\mozilla firefox\firefox.exe" -p). press ok.

while starting firefox u have to create two separate profiles of firefox so that u can login to two accounts of any(orkut,yahoo,rediff or anything else).......
for three logins create three profiles of firefox.........

Read More

shutdown u sysetm very fast

Most of the time windows shutdowns too slow. Heres the way to fasten your shutdown speed.

open regedit and then go to:-

HLocal_machine _user/system/controlset001/control
in the right hand panel you wil finad a DWORD named "wait to kill service time out"
its the last key there.Just double click on it and the change its value to 0 .
the default is 20000.
This will give no waiting time for running processes, and hence will
shutdown/restart your pc in less than 5 secs..

Clean the Prefetch to Improve the system Performance
Clean Your Prefetch to Improve Performance

This is a unique technique for WinXP. We know that it is necessary to scrub registry
and TEMP files for Win9X/ME/2000 periodically.
Prefetch is a new and very useful technique in Windows XP.
However, after using XP some time, the prefetch directory can
get full of junk and obsolete links in the Prefetch catalog, which can slow down your
computer noticeably.
Open C(system drive):/windows/prefetch, delete those junk and obsolete files,
reboot. It is recommended that you do this every month

Read More

How to disable windows Genune Advantage notifications in just 3 steps

Following three simple steps now you can get rid of the pesky and sometimes buggy Windows Genuine Advantage (WGA) notifications:

1. Reboot Windows in safe mode (hold the f8 key while booting and you will get the option to boot in safe mode) and then:
2. Open Registry Editor (regedit.exe) and search for wgalogon folder and delete it. You should backup up the registry beforehand, in case somethiong goes wrong.
3. In your windows directory search for files wga* and delete them.
You are done!
Now reboot back normally and continue your work. Windows Genuine Advantage will not bother you anymore.
Warning: Use at your own risk. Backup everything before you do.

Read More

some important serials

flash 5 FLW500-03143-77238-80660

Adobe photoshop 6 PWW600R7105467-948

Adobe LiveMotion 1.0.0.5.3 GDW100R7100002-687

Adobe InDesign 1.5 : IPE123R12345678-337

Adobe Photoshop 5.5 Update : PWW400R7106337-339

Autocad 2000 112-11111111 cd-key 5X8NUG

Autocad 14 117-99703105 cd-key W36H code C3DF32EA


3D STUDIO MAX VERSION 3
Serial: 110-12345678
CDKey: S4ED6W
Authorization Code: a8498381 (any company or individual)

ACDSEE 3.1 License Number: 132728175249781441

Macromedia Fireworks 3 Serial#: FWW300-65137-37255-19336

ExtensisPhotoTools : HCE-300-001-612-110647

MacroMedia Freehand 9 : FHW900-00010-47278-88947

PC-Cillin 2001 V8.02 WinNT/2K: sn:OSJF-9999-6388-8759-0082

PC-Cillin 2001 V8.02 Win9x/Me: sn:OSJF-9999-6388-8759-0082

UltraEdit V8.00 : Name:singnet Code:U9J9P-ADD8C-M9X1Q-G5Q4D

Kill2000 for Win2000 Profressional : 09978397 HLYXG-X14CY-XY9KC-17H4J

WindowsXP Beta2 Build 2428 : CdKey:RBDC9-VTRC8-D7972-J97JY-PRVMG

Microsoft Windows ME : CD-KEY: K9KDJ-3XPXY-92WFW-9Q26K-MVRK8

Microsoft Windows2000 Server Family : CDKEY:H6TWQ-TQQM8-HXJYG-D69F7-R84VM

Microsoft Windows2000 Professional : CDKEY:PQHKR-G4JFW-VTY3PG4WQ2-88CTW

WinImage 5.0 : Name : Registered Code : 711F0CD

ClipMate V5.1.08 : Name: Wayne Code: GFA7584650848

Chem Office 2000 Ultra Final : serial: 199920000 keycode: FRKNLGMPT

PartitionMagic 6.0 : SN: PM600ENSP1-11111131

Microsoft WindowsNT WorkStation4.0 : CDKEY:727-1111111

WinDVD 2000 2.3 : Cdkey:RZV9GVF4YJVDJMI

RealProducer Plus 8.5 Beta1 : S/N: 212-09268-0126

RealProducer Plus 8.0.0.45 : Serial #212-08976-3639

Macromedia Fireworks 4 : S/N:FWW400-02666-67248-02548

ExtensisPhotoTools : HCE-300-001-612-110647

Macromedia Dreamweaver UltraDev 4.0 : SN:UDW400-06066-07241-71420

Macromedia Ultradev 4 : SN:UDW400-81765-17241-89338

Macromedia Dreamweaver 4 : S/N:DWW400-03771-57289-73501

Namo WebEditor 4 : Serial:140422-001097 CD-Key:1XM6FU XN8AW8 S0EBF08 RYTX4V3

GetRight V4.11 : ode:941829970387

Microsoft SQL Server 7.0 : S/N:311-0432642

FrontPage 98 : S/N:8090-1111111

Macromedia Dreamweaver UltraDev 1.0 Final : Serial#: UDW100-01315-77219-49377

CourseBilder for Macromedia Dreamweaver : Serial#: CBW300-04454-27256-33451

Adobe GoLive 4 : S/N: GJW400R2100006-625

Humanic Books v2.1 : serial number is: HBR21-VER02-5000510

ProtoView ActiveX Component Suite 8.0 : S/N: ACS8-5-33510475-3827

Numega SoftICE 4.05 for WinNT/2000 : S/N: 5109-0122DF-FF

Numega SoftICE 4.05 for Win9x : S/N: 5109-0122DF-FF

Read More

Macromedia serial numbers

Dream Weaver- (serial number)
WBW 300-09125-57241-59796

Fireworks- (serial number)
FBW 300-07931-37258-49754

FLASH SERIAL NOS (Don’t ya just love me??)

Flash 5 mac: FLM500-63543-17286-49309


Flash 5 win: FLW500-65943-77238-59369

Read More

some adobe keys......................

Adobe Illustrator v8.0 : s/n: EXX500R5900103198-517
s/n: ABW800X7102095-685

Adobe GoLive v4.0: s/n: GJW400R2100006-625

Adobe Acrobat v4.0: s/n: AOW301R7136978-298

Adobe AfterFX: s/n: EWW400R3000406-412 (QuickTime Name: Glow S/N: 785D-FF87-1394-5a3e-2484)

Adobe Pagemill v3.0: s/n: MLW300R7102296-238
s/n: MLW200R7139069-780

Adobe Premiere v5.0: Name - Chumbawamba C
Last - X-Force
Company - X-Force
s/n - MXX500R145503-500-448

Read More